The Olympus ME33 boundary microphone is the mic that I recommend for recording medium and large focus group discussions. There are several reasons why, and I’ll touch on them later on in this review, but first a couple of suggestions. If you are looking to record focus groups, meetings or conferences in a boardroom setting, I recommend you also read this post on how to record focus groups and this post on choosing a recorder for focus group discussions. Those two posts have lots of tips that’ll help you capture great sound in a boardroom setting.

Summary: Olympus ME33 Boundary Microphone ReviewOlympus ME33 Review

  • The Good: you can connect up to 6 mics. Captures very little background noise; but captures distant voices very well. Sleek, attractive design.
  • The Bad: only works with digital recorders with plug-in power (1.5v-5v).
  • Verdict: these microphones are perfect for recording audio in large meeting or conference rooms. Also great for recording focus group discussions with a large number of participants. Buy it now from amazon – you won’t regret it.

Digital recorders are great for recording qualitative data. However, for optimal recording quality, you need to place them close to your subject(s). Now, if you have a large number of participants, you can use multiple recorders and place them strategically around a room. But, you will need to do a lot of work synching up the recording. Easy enough for someone who has audio editing knowledge, but for most of us it’s not easy.

The Olympus ME33 boundary mic provides an elegant solution; daisy chain connection. That means that when you connect 2 microphones, you’ll get one output. And you can connect up to 3 Olympus ME33 microphones in a daisy chain.  What that means is you get the coverage of 3 digital recorders, but only one audio file. No need to sync audios in post. But there’s more.

Olympus ME33 Boundary Microphone Specifications

Input Microphone jack3.5 ø mm / Impedance 2.2 kΩ
Microphone type Electret condenser microphone
Microphone characteristics Omni‑directional
Microphone sensitivity / gain ‑ 35dB at 1kHz
Dimensions (Ø) 120mm Ø x 23mm
Weight 110g
Cable length 2 meters
Frequency response 70 - 10kHz

Olympus ME33 Boundary Microphone Splinter

The Olympus ME33 is a monaural microphone. Which means that it only records on one channel. In stereo setting, it will record in the Right or Left channel. So, you can connect 3 Olympus ME33 boundary microphones in a daisy chain and they’ll record audio into the Left channel of a stereo digital recorder, and then add another set of 3 Olympus ME33 boundary microphones in a daisy chain and they’ll record in Right channel of record. Brilliant!

That’s why when you read Olympus ME33 boundary microphones documentation, it states that you can daisy chain up to 6 microphones. You’re actually daisy chaining 2 sets of 3 boundary mics, using a sprinter (comes with the mic) to separate the stereo mic input on a digital recorder into Left and Right channel, and using that to connect the 2 sets of daisy chained microphones to a recorder.

Daisy Chaining 6 Olympus ME33 Boundary Microphones

I’ve had questions from researchers about how this setup works. Hopefully I’ve explained it well enough that you now have a good understanding of how to set them up. It’s easy as, place them on the conference table, connect the mics, plug them into the recorder; press record on the recorder to start recording. Very easy. If you have any questions, please post them in the comment section below and I’ll be glad to help.

Alright, back to the review. Let me start with the features that I like.

The Good

I really like the daisy chain feature. I own a USB boundary microphone and it does not have this feature. I can only imagine what I could do with it if it did! You can also use 2 Olympus ME33 boundary microphones without daisy chaining them. So you have a lot of options on the number (1-6) of Olympus ME33 mics you can use to record your qualitative data.

Basically, the larger the room, the more mics you need. From my testing, I’ve found that optimal coverage is around a 4tf radius. For a 15 ft long conference table, you only need a 2 of them. If the table is really wide, more than 8 ft, you’ll need more.

I’m also impressed with the quality of the sound captured. Olympus rate the sensitivity of this microphone as -35dB. That’s high. I’d expect it to capture a lot of background noise. But it does not! In fact, I’ve compared the Olympus ME33 boundary mics with all other mics/recorders that I have and it captures the least noise. In addition, it does a capture distance voices very well.  So low noise, good audio coverage. Perfect.

Finally, it look good. I recently used the ME33 to record a stakeholder meeting and I could tell they were impressed by the shiny thing in the middle. As I said, I own other boundary mics (because they so good at noise isolation), and the Olympus ME33 has the sleekest design. And it’s also very easy to store. You wrap the cord underneath each mic, very neat. Kudos to the design team at Olympus.

The Bad

Plug-in power. You need plug in power to use this microphones. It only works on digital recorders that provide plug in power of 1.5v- 5v. I don’t know why Olympus did not power this with a separate 1.5v battery (there’s definitely enough room in the casing). But the plug in power requirement means that I cannot connect the ME33 to my computer/laptop, phone and so many other devices. I am restricted to digital recorder with plug in power.

Now, most digital recorders have plug in power, but how much varies. And if you are connecting 6 boundary microphones to a recorder, you’ll need a lot of power. From my testing, I’ve found that the Sony ICD-ux560 will comfortably power 2 boundary mics. For more than 2 boundary microphones, the Zoom H1n works very well.

My other gripe with the Olympus ME33 is that it has a stereo mic output. I know, I earlier stated that this is a mono mic. It is. But the output is a fake stereo, a mono channel doubled up. It’s not Left and Right channel, but one channel duplicated. Why is this important? If you connect the Olympus ME33 directly to the recorder (without using the splinter), you get a stereo recording. AND don’t use the splinter if one of the channels is empty – you’ll generate noise!

Verdict

The Olympus ME33 captures very little background noise, but captures distant voices very well. And you can connect up to 6 microphones using its daisy chain capabilities. All that equates to very large coverage. That makes this microphone perfect for recording audio in large meeting or conference rooms. The only downside: you’ll need a digital recorder that provides plug in power…

 

References

Olympus ME33 Boundary Microphone Manual. 

4 thoughts on “Olympus ME33 Review

  1. JJJ

    If you connect a single one of these to the Zoom H1, is there a way to set it up so both this and the zoom record? Or will the mics in the Zoom H1 turn off so only the external one does the recording?

    1. Isaac Post author

      You’re right, once you plug in an external mic the H1n automatically turns off the internal mics.
      And there’s no way (that I know off) of turning off this default action.
      If you don’t mind me asking, why do you need to record the internal mics?
      Isaac

      1. JJJ

        Wanted to save money by having the recorder at one end of the table and the mic at the other end instead of needing to buy two of the mics.

        1. Isaac Post author

          Ah okay – got you, yeah the ME33s are not cheap. If you’re really on a tight budget, I’d recommend you buy a couple of the Sony PX470 (I got mine for less than $50) or the Sony ICD ux560 (got mine for $70) and place one at each end of the table. You’ll have to do some work in post to sync the recordings, and spend sometime getting the right settings for your location. But they’ll get you decent audio. More on the px470 here.
          I’d be interested to hear (and I’m sure other researchers would love additional feedback) what you end up getting and how it all worked out…

          KD
          Isaac

Leave a reply
required